If you need to remove the doors from your LG refrigerator for transport, cleaning, or any other reason, it’s essential to know the steps. Be sure to have the right tools on hand, like a screwdriver or wrench, and keep track of all screws and components to avoid losing any parts. If you’re unsure about the steps, refer to this guide and learn how to remove doors from LG Refrigerator.
Things to Do Before Removing the LG Fridge Door
Before you begin, it’s important to follow the things mentioned below.
- Unplug the Refrigerator
- Turn Off and Disconnect the Water Supply
- Clear the Refrigerator by evacuating the things from the refrigerator.
How to Remove Doors from LG Refrigerator
1. Locate the clip around the joint area of the water line. You’ll need to push down on the collet and carefully pull the water hose out. This step is vital to disconnect the water supply from the door.
2. Take a screwdriver to remove the screws holding the water line cover in place. Once unscrewed, gently detach the cover to access the water line and other components.
3. Using a screwdriver, unscrew the screws securing the top hinge cover. This will expose the hinge mechanism that holds the door in place.
4. After removing the screws, carefully lift the hinge cover. This will give you access to the wire harnesses, which connect the door’s electrical components to the refrigerator.
5. Disconnect the wires by gently unplugging each connector. Some models might have a ground wire, so be sure to remove the screw holding it in place (if applicable).
6. Slowly pull the water line hose out of the connector. Be cautious to avoid damaging the hose, as it may be fragile.
7. Turn the hinge lever to unlock it. This is essential to safely free the door from its hinge mechanism.
8. With one hand holding the freezer door, gently slide the hinge out over the wires and water hose. This step requires some finesse, but it should be easy once the hinge is unlocked. Then, lift the door gently from the bottom hinge pin.
9. After you remove it, set it down on a soft surface like a towel or blanket to avoid scratching or damaging it. Never place the inside of the door directly on the floor.
Steps to Reasamble the LG Refrigerator Doors
Once the doors are removed and maintenance is complete, follow these steps to reassemble your refrigerator doors:
1. Lift the refrigerator door and place it onto the bottom hinge pin, ensuring it’s properly aligned.
2. Position the wires in the hinge holder and fasten the hinge securely to avoid stability issues with the door. Follow the same steps for the freezer door, securing the hinge and wires.
3. Insert the water line hose back into its connector hole. Ensure the hose reaches the back of the refrigerator to avoid kinks.
Note: Ensure the water line is aligned and free from twists to prevent blockages.
4. Reattach the ground wire to its corresponding screw if your model has one.
5. Reconnect the wire connectors on both sides of the refrigerator, ensuring they are firmly in place.
6. Place the wiring below the hinge cover and secure the cover with screws.
7. Attach the water line cover, securing it with screws to protect the water line.
8. Push the water supply hose fully into the connector until it clicks into place, ensuring no leakage.
9. Insert the clips into the joint area to fasten the water supply line.
Double-check all components, including the hinge cover and water line. Plug in the refrigerator and turn on the water supply.
FAQ
LG claims that removing the LG refrigerator doors on your own is unsafe as it may lead to self-injury or damage to the refrigerator. It is better to approach the technician to do it.
To remove the LG refrigerator door handle, unscrew the screws hidden under the plastic covers on the handle. Then, gently pull the handle off the door, repeating for the other door if necessary.
